Wijzigen voor document Asbest berekening via rapportage (BETA)

Samenvatting

• Paginaeigenschappen (2 gewijzigd, 0 toegevoegd, 0 verwijderd)

Details

Paginaeigenschappen

Titel

...	...	@@ -1,1 +1,1 @@
1		-Asbestos calculation (BETA)
	1	+Asbest berekening via rapportage (BETA)

Inhoud

...	...	@@ -1,19 +1,11 @@
1	1
2	2
3	3
4		-= Description =
	4	+= Beschrijving =
5	5
6		-This calculation flow, in very basic steps, describes the process of doing asbestos research, using the SIBK BRL 2018 and the NEN5707 / NEN 5897 as a guideline. This flow is there to give a basic idea of the processes in asbestos soil research.
7	7
8		-First, historical research (NEN 5725) has to be done to be able to make an initial strategy for the research plan. Once the fieldworker arrives at the location, a visual inspection of the ground level has to be done, if possible. If the suspicion of asbestos is in a lower layer of soil, e.g. 0,5-1m, there's no need for an inspection) The process of an asbestos inspection is explained in 1.1
	7	+== De berekening ==
9	9
10		-After the field inspection, an hole needs to be drilled. There are two types of inspection holes in asbestos research, an asbestos inspection hole (usually 0,3m in diameter, x 0,5m in depth) for explorative research and an asbestos trench for further research (usually 0,3m wide, at least 200cm long but this can differ depending on the research location / research plan!). The process of sampling asbestos is explained in more detail in section 1.2.
11	11
12		-After sampling the sample needs to be properly packaged and marked to send towards a lab for analysis.
13	13
14		-== The calculation ==
15		-
16		-Below you will find the design of the flow of the calculation made based on the Streamline Reporting data format.
17		-
18		-
19	19	[[image:Asbestos 2.0 flow.png]]